|
|
|
|
Search Hartville Tool
Handsaws |
[«] « prev | 1 | 2 3 | next » [»] 60 Total Results
Showing Results from 1 to 20
|  Duplex Rabbet Plane
Also known as a Fillister plane, a Duplex Rabbeting plane is useful for producing rabbeting cuts in doors frames, windows, furniture, and cabinet carcasses. It has 2 bed configurations: One for normal rabbet work; and a second bull nose configuration for stopped work. The plane will cut rabbets both with and across the grain. It is equipped with a spur cutter to prevent tearing and splintering on cross grain cuts. The adjustable guide fence and depth stop help determine precise width and depth of cut. Plane is approx. 8-1/2" long with a 1-1/2" wide blade. Ductile cast iron body. India
|  (A) Gent's Saw - 4"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (B) Gent's Saw - 6"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (C) Gent's Saw - 8"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (D) Gent's Saw - 10"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (E) Mini Gent's Saw - 4"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (F) Mini Gent's Saw - 6"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (G) Mini Gent's Saw - 8"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (H) Mini Reversible Gent's Saw - 4"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (I) Reversible Gent's Saw - 10"
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (J) Jeweler's Saw
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (K) Flush Cut Saw
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (L) Fine Curved Inlay Saw
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
| (M) Veneer Saw
Ideal for dovetailing, small carcass work, inlaying, and other fine joinery, these saws have alloy steel blades with a mirror finish, high quality brass backs, and attractively finished rosewood handles. They are all the finest quality, and are all made in Sheffield, England.
Gents Saws: These standard size Gents Saws are 2-1/4" wide x .020" thick with 25TPI.
Mini Gents: Blades are 1-1/2" wide and are also .020" thick. They are especially suitable for the highest precision work.
Pax Reversible & Mini Reversible Gent's Saws: These saws, with their offset alloy blades, facilitate either the left or right handed workman. The cranked rosewood handles allow you to cut into the most awkward of corners with ease. The 4" Mini Reversible has a 1-1/2" wide x .020" thick blade. The larger 10" Reversible has a 2-1/4" wide x .020" thick blade.
Pax Flexible Flush Cutting Saw: This saw has a flexible alloy steel blade, which cuts on the pull stroke. It is well suited for cutting dowels etc. The same high quality and attractively finished rosewood handle is standard and is suitable for the highest precision work. The 20 TPI blade is 6" long x 1" wide x .016" thick.
Pax Fine Inlay Saw (curved): Has an alloy steel blade with a bright finish high quality, brass back. Its super thin curved blade is specially crafted to enable the finest of veneer cutting. The 20 TPI blade is 3" long x 1-1/4" wide with a .013" kerf. Rosewood handle.
Pax Veneer Saw: A light handle saw for veneer work. This very fine curved blade has 15 TPI to facilitate careful precision work. 3" long x 2" wide blade. Rosewood handle.
Jewelers Saw: This fine jointing saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard. It is suitable for the highest precision work. The 40 TPI blade is 6" long x 1-1/2" wide with a .013" kerf.
|  12" English Bow Saw
Before the advent of band saws and jig saws this was the tool used for cutting everything from curves to furniture joints. The saw can be used on either the push or pull stroke and the blade can be turned to cut at any angle by rotating the handles. The blade is tensioned by twisting the cord winding with the wedge, using the cross bar as a stop. Made from stained beech with pin type brass blade holders. 12" x 1/4" x 10 TPI carbon steel blade. 5-1/2" throat depth. England
| Spare Bow Saw Blades
Before the advent of band saws and jig saws this was the tool used for cutting everything from curves to furniture joints. The saw can be used on either the push or pull stroke and the blade can be turned to cut at any angle by rotating the handles. The blade is tensioned by twisting the cord winding with the wedge, using the cross bar as a stop. Made from stained beech with pin type brass blade holders. 12" x 1/4" x 10 TPI carbon steel blade. 5-1/2" throat depth. England
|  Fret Saw
Excellent for detailed scroll saw and marquetry work in wood; plastic; or soft, thin metal such as brass or copper. Reaching the center of wide stock should be no problem as this well made saw has a depth of cut of nearly 12". The sturdy chrome-plated flat wire frame maintains excellent tension and accepts 5" plain end fret, scroll, spiral, and jewelers blades. Beech handle folds away between frame ends for storage. All blades offered below are skip tooth pattern. Skip tooth blades cut fast, have good chip clearance, and leave smooth finish. 36 Pc Blade Assortment pack includes 12 each of sizes #2, 5, & 7. All other sizes 12 blades per pack. Saw - Germany. Blades - USA
| 36 Pc. Blade Accessory Pack
Excellent for detailed scroll saw and marquetry work in wood; plastic; or soft, thin metal such as brass or copper. Reaching the center of wide stock should be no problem as this well made saw has a depth of cut of nearly 12". The sturdy chrome-plated flat wire frame maintains excellent tension and accepts 5" plain end fret, scroll, spiral, and jewelers blades. Beech handle folds away between frame ends for storage. All blades offered below are skip tooth pattern. Skip tooth blades cut fast, have good chip clearance, and leave smooth finish. 36 Pc Blade Assortment pack includes 12 each of sizes #2, 5, & 7. All other sizes 12 blades per pack. Saw - Germany. Blades - USA
| #2/0 - .022" W x .008"T x 33 TPI
Excellent for detailed scroll saw and marquetry work in wood; plastic; or soft, thin metal such as brass or copper. Reaching the center of wide stock should be no problem as this well made saw has a depth of cut of nearly 12". The sturdy chrome-plated flat wire frame maintains excellent tension and accepts 5" plain end fret, scroll, spiral, and jewelers blades. Beech handle folds away between frame ends for storage. All blades offered below are skip tooth pattern. Skip tooth blades cut fast, have good chip clearance, and leave smooth finish. 36 Pc Blade Assortment pack includes 12 each of sizes #2, 5, & 7. All other sizes 12 blades per pack. Saw - Germany. Blades - USA
| #5 - .038" W x .016" T x 12.5 TPI
Excellent for detailed scroll saw and marquetry work in wood; plastic; or soft, thin metal such as brass or copper. Reaching the center of wide stock should be no problem as this well made saw has a depth of cut of nearly 12". The sturdy chrome-plated flat wire frame maintains excellent tension and accepts 5" plain end fret, scroll, spiral, and jewelers blades. Beech handle folds away between frame ends for storage. All blades offered below are skip tooth pattern. Skip tooth blades cut fast, have good chip clearance, and leave smooth finish. 36 Pc Blade Assortment pack includes 12 each of sizes #2, 5, & 7. All other sizes 12 blades per pack. Saw - Germany. Blades - USA
|
[«] « prev | 1 | 2 3 | next » [»] 60 Total Results
Showing Results from 1 to 20
|
|
|
| |
|
|
|
|
|
|
|