Magnets | Rowecraft LLC

Search Hartville Tool

Magnets, Cups, Washers

18 Total Results
Showing Results from 1 to 18

Magnetic Tool Jack
Makes tools easier to grab. Put chuck keys, wrenches, and other tools right where you need them. Easily exchange tools or move the holder to a new location. The small cupped end uses an incredibly strong 3/8" rare earth magnet to hold the tool. The large end houses a 1/2" rare earth magnet to anchor the base. Magnets are included. Holds objects weighing up to 1 lb. Black oxide coated steel base is 5/8" tall. China

.25" Mag. - 3/8" OD - .25" Thick - Press Fit (Cup)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

.375" Mag. -1/2" OD - .25" Thick - #4 Screw (Cup)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

.500" Mag. -5/8" OD -.25" Thick - #4 Screw (Cup)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

.750" Mag. -7/8" OD - 9/32" Thick - #10 Screw (Cup)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

1.00" Mag. - 1-1/8" OD - 9/32" Thick - #10 Screw (Cup)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

.25" Mag. - 3/8" OD - 3/32" Thick - #4 Screw (Washer)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

.375" Mag. - 1/2" OD - 3/32" Thick - #4 Screw (Washer)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

.500" Mag. - 5/8" OD - 3/32" Thick - #4 Screw (Washer)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

.750" Mag. - 7/8" OD - 5/32" Thick - #10 Screw (Washer)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

1.00" Mag. - 1-1/8" OD - 5/32" Thick - #10 Screw ( Washer)
The configuration of the cups generally increases the holding power of rare earth magnets by as much as 4 times. The steel washers compliment the cups by acting as the perfect strike plate. All cups and washers are countersunk to be screwed in, except for the 1/4" cup, which is barbed for a press fit. If you anticipate a need to remove the magnet at some point, you can simply file a notch in the side of the cup to provide a pry point to lift it out. Zinc plated steel. China

Note: Cups and washers are not magnetic.

.25" x .10" Rare Earth Magnet

The larger magnets are so powerful, it takes a pair of very strong hands to pull them apart. Use them for mounting tools, holding keys and adjusters on your machines, holding work and rules on steel machine tables, magnetic catches for doors, toys... They're so versatile, our customers tell us of new uses all the time. Magnets are nickel plated and have rounded edges to alleviate chipping. They can be held in place with epoxy. See below for approximate direct pull and Gauss ratings. China

Rare Earth Magnet Direct Pull & Gauss Ratings
#10369 - Gauss = 3100 to 3300. Max. direct pull force = 2.5 lb.
#10370 - Gauss = 2700 to 2900. Max. direct pull force = 5.0 lb.
#10371 - Gauss = 3000 to 3200. Max. direct pull force = 9.0 lb.
#10372 - Gauss = 2400 to 2600. Max. direct pull force = 22 lb.
#10373 - Gauss = 2300 to 2500. Max. direct pull force = 30 lb.

.375" x .10" Rare Earth Magnet

.50" x .125" Rare Earth Magnet

.75" x .125" Rare Earth Magnet

1.0" x .125" Rare Earth Magnet

Magnetic Tool Bar - 13"
Forget those cheap magnetic racks that drop your tools all over the floor! These safely hold hammers, wrenches, chisels, etc., AND make them instantly accessible. Mounts easily to a wall or workbench. USA

Magnetic Tool Bar - 24"
Forget those cheap magnetic racks that drop your tools all over the floor! These safely hold hammers, wrenches, chisels, etc., AND make them instantly accessible. Mounts easily to a wall or workbench. USA

18 Total Results
Showing Results from 1 to 18