Very similar to luthier's hand planes, Collins Bunny Planes are small rabbeting profiling planes that excel at smoothing scarf transitions, crown molding joints, handrails and other trim. They also excel in carving, restoration work, and general rabbet and shoulder plane work.

Cabinetmakers and jewelry box makers will find themselves using them frequently for cleaning up moldings, trims, and other profiled surfaces. The planes are just 3" long, yet they are surprisingly easy to hold and control. The bodies are precision cut by the wire EDM method from low carbon stock and the blades are made from 1095 steel.

Standard Bunny Plane (C) - Has a 5/16" wide flat sole with a full width square blade and will handle the larger radiused blades found in the 6 Pc. Set.

Optional 6 Pc. Flat Blade Set (D) - Includes 1 standard flat blade and 5 convex blades with radiuses of 2", 1-3/4", 1-1/2", 1-1/4", & 1".

Radius Bunny Plane (A) - (also 5/16" wide) has convex sole with a radius of 3/4" with matching blade.

Optional 5 Pc. Convex Blade Set (B) - Has 5 curved blades with radiuses of 3/4", 5/8", 1/2", & 1/4". Blades should be selected to match the radius of a cove being dressed. Convex blades are marked in increments of 1/16" (ie. 2" = #32, 1" =#16, etc.) with radiuses from 1/4" up to 2".

Deluxe Bunny Plane Set (E) - Includes both the flat and radius planes, a complete 13 pc. set of blades, and leather holster with snap closures. Patent Pending. USA

Very similar to luthier's hand planes, Collins Bunny Planes are small rabbeting profiling planes that excel at smoothing scarf transitions, crown molding joints, handrails and other trim. They also excel in carving, restoration work, and general rabbet and shoulder plane work.

Cabinetmakers and jewelry box makers will find themselves using them frequently for cleaning up moldings, trims, and other profiled surfaces. The planes are just 3" long, yet they are surprisingly easy to hold and control. The bodies are precision cut by the wire EDM method from low carbon stock and the blades are made from 1095 steel.

Standard Bunny Plane (C) - Has a 5/16" wide flat sole with a full width square blade and will handle the larger radiused blades found in the 6 Pc. Set.

Optional 6 Pc. Flat Blade Set (D) - Includes 1 standard flat blade and 5 convex blades with radiuses of 2", 1-3/4", 1-1/2", 1-1/4", & 1".

Radius Bunny Plane (A) - (also 5/16" wide) has convex sole with a radius of 3/4" with matching blade.

Optional 5 Pc. Convex Blade Set (B) - Has 5 curved blades with radiuses of 3/4", 5/8", 1/2", & 1/4". Blades should be selected to match the radius of a cove being dressed. Convex blades are marked in increments of 1/16" (ie. 2" = #32, 1" =#16, etc.) with radiuses from 1/4" up to 2".

Deluxe Bunny Plane Set (E) - Includes both the flat and radius planes, a complete 13 pc. set of blades, and leather holster with snap closures. Patent Pending. USA

Very similar to luthier's hand planes, Collins Bunny Planes are small rabbeting profiling planes that excel at smoothing scarf transitions, crown molding joints, handrails and other trim. They also excel in carving, restoration work, and general rabbet and shoulder plane work.

Cabinetmakers and jewelry box makers will find themselves using them frequently for cleaning up moldings, trims, and other profiled surfaces. The planes are just 3" long, yet they are surprisingly easy to hold and control. The bodies are precision cut by the wire EDM method from low carbon stock and the blades are made from 1095 steel.

Standard Bunny Plane (C) - Has a 5/16" wide flat sole with a full width square blade and will handle the larger radiused blades found in the 6 Pc. Set.

Optional 6 Pc. Flat Blade Set (D) - Includes 1 standard flat blade and 5 convex blades with radiuses of 2", 1-3/4", 1-1/2", 1-1/4", & 1".

Radius Bunny Plane (A) - (also 5/16" wide) has convex sole with a radius of 3/4" with matching blade.

Optional 5 Pc. Convex Blade Set (B) - Has 5 curved blades with radiuses of 3/4", 5/8", 1/2", & 1/4". Blades should be selected to match the radius of a cove being dressed. Convex blades are marked in increments of 1/16" (ie. 2" = #32, 1" =#16, etc.) with radiuses from 1/4" up to 2".

Deluxe Bunny Plane Set (E) - Includes both the flat and radius planes, a complete 13 pc. set of blades, and leather holster with snap closures. Patent Pending. USA

Very similar to luthier's hand planes, Collins Bunny Planes are small rabbeting profiling planes that excel at smoothing scarf transitions, crown molding joints, handrails and other trim. They also excel in carving, restoration work, and general rabbet and shoulder plane work.

Cabinetmakers and jewelry box makers will find themselves using them frequently for cleaning up moldings, trims, and other profiled surfaces. The planes are just 3" long, yet they are surprisingly easy to hold and control. The bodies are precision cut by the wire EDM method from low carbon stock and the blades are made from 1095 steel.

Standard Bunny Plane (C) - Has a 5/16" wide flat sole with a full width square blade and will handle the larger radiused blades found in the 6 Pc. Set.

Optional 6 Pc. Flat Blade Set (D) - Includes 1 standard flat blade and 5 convex blades with radiuses of 2", 1-3/4", 1-1/2", 1-1/4", & 1".

Radius Bunny Plane (A) - (also 5/16" wide) has convex sole with a radius of 3/4" with matching blade.

Optional 5 Pc. Convex Blade Set (B) - Has 5 curved blades with radiuses of 3/4", 5/8", 1/2", & 1/4". Blades should be selected to match the radius of a cove being dressed. Convex blades are marked in increments of 1/16" (ie. 2" = #32, 1" =#16, etc.) with radiuses from 1/4" up to 2".

Deluxe Bunny Plane Set (E) - Includes both the flat and radius planes, a complete 13 pc. set of blades, and leather holster with snap closures. Patent Pending. USA

Very similar to luthier's hand planes, Collins Bunny Planes are small rabbeting profiling planes that excel at smoothing scarf transitions, crown molding joints, handrails and other trim. They also excel in carving, restoration work, and general rabbet and shoulder plane work.

Cabinetmakers and jewelry box makers will find themselves using them frequently for cleaning up moldings, trims, and other profiled surfaces. The planes are just 3" long, yet they are surprisingly easy to hold and control. The bodies are precision cut by the wire EDM method from low carbon stock and the blades are made from 1095 steel.

Standard Bunny Plane (C) - Has a 5/16" wide flat sole with a full width square blade and will handle the larger radiused blades found in the 6 Pc. Set.

Optional 6 Pc. Flat Blade Set (D) - Includes 1 standard flat blade and 5 convex blades with radiuses of 2", 1-3/4", 1-1/2", 1-1/4", & 1".

Radius Bunny Plane (A) - (also 5/16" wide) has convex sole with a radius of 3/4" with matching blade.

Optional 5 Pc. Convex Blade Set (B) - Has 5 curved blades with radiuses of 3/4", 5/8", 1/2", & 1/4". Blades should be selected to match the radius of a cove being dressed. Convex blades are marked in increments of 1/16" (ie. 2" = #32, 1" =#16, etc.) with radiuses from 1/4" up to 2".

Deluxe Bunny Plane Set (E) - Includes both the flat and radius planes, a complete 13 pc. set of blades, and leather holster with snap closures. Patent Pending. USA

Plane maker H. N. T. Gordon handcrafts these planes with the discerning craftsman in mind. Their most unique feature is the bedding angle of the extra thick irons (60 degrees for smoothing and shoulder planes, 55 degrees for the block plane) making them particularly useful for woods with hard, wild, or difficult, or grains. The bedding angle permits reversing the irons (bevel up) putting the cutting edge at the proper angle for scraping. These planes are sharp and ready to go out of the box. A rarity in hand tools these days. All irons are hardened to between RC 62-64. Complete instructions for use and care are included with every plane. Note: Availability is limited. Australia

Palm Smoother (B) - A scaled down version of the Smoothing Plane, it's useful for the final smoothing or trimming of smaller stock surfaces. Ebony body is approx. 1-1/2" wide x 4-3/4"long. 18% Tungsten HSS Steel Blade. An absolute gem of a small plane!

Shoulder Plane (E) - Used to clean up the shoulders of tenons across the grain, or rabbets with the grain. Fill brass sole for wear resistance. Brass blade abutment. 1" Ironwood Plane is approx. 7-3/4" long. Tool steel blade.

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan

To discover the secret of their superior performance, take one in hand and make a cut. Since they cut on the pull stroke, they will not buckle; a thinner blade can be used; and a finer kerf results. The blades cut incredibly fast due to their extreme hardness (52-54 Rockwell), and unique shark-like teeth. The rattan-wrapped handles allow either a one-hand or two-handed grip. Japan