Search Hartville Tool
Router Bits -- Roman Ogee & Chamfer
|
|
|
20 Total Results
Showing Results from 1 to 20
|
 22-1/2 DEGREE X 15/16" CL X 7/8" CH
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork; or create multi-sided boxes. Use bit #R2309 for making 6 sided boxes. Use bit #R2307 for 8 sided boxes. Use bit #R2325 for 12 sided boxes. 2 flute. Carbide tipped. Made by Whiteside. USA
|
30 DEGREE X 7/8" CL X 3/4" CH
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork; or create multi-sided boxes. Use bit #R2309 for making 6 sided boxes. Use bit #R2307 for 8 sided boxes. Use bit #R2325 for 12 sided boxes. 2 flute. Carbide tipped. Made by Whiteside. USA
|
15 DEGREE X 1" CL X 15/16" CH
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork; or create multi-sided boxes. Use bit #R2309 for making 6 sided boxes. Use bit #R2307 for 8 sided boxes. Use bit #R2325 for 12 sided boxes. 2 flute. Carbide tipped. Made by Whiteside. USA
|
 5/8" CL X 7/16" CH - 1/4" SHANK
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork, or create perfectly mitered stock for 4 sided legs or columns. R2302 is 1/4" shank. All others listed are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
5/8" CL X 7/16" CH - 1/2" SHANK
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork, or create perfectly mitered stock for 4 sided legs or columns. R2302 is 1/4" shank. All others listed are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1-1/16" CL X 3/4" CH - 1/2" SHANK
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork, or create perfectly mitered stock for 4 sided legs or columns. R2302 is 1/4" shank. All others listed are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1-1/2" CL X 11/16" CH - 1/2" SHANK
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork, or create perfectly mitered stock for 4 sided legs or columns. R2302 is 1/4" shank. All others listed are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
 1/8" R X 1-1/8" D X 3-3/4" OAL
Cuts full thickness profile in a single pass. Bit has an adjustable cutting length to simultaneously create a top and bottom round over on materials of different thickness. Add or remove shims (included) to adjust length.
Includes 7/8" OD center pilot bearing (#RB5) for flush round over. Use a #RB20 bearing for 1/16" deep bead. Use a #RB27 bearing for a 1/8" deep bead. #RB20 and #RB27 bearings sold separately. Maximum spread between the top and bottom of fully shimmed cutters is 1-5/8".
Bits are 1/2" shank with 2 flutes and carbide tips. Made by Whiteside. USA
|
3/16" R X 1-1/4" D X 3-3/4" OAL
Cuts full thickness profile in a single pass. Bit has an adjustable cutting length to simultaneously create a top and bottom round over on materials of different thickness. Add or remove shims (included) to adjust length.
Includes 7/8" OD center pilot bearing (#RB5) for flush round over. Use a #RB20 bearing for 1/16" deep bead. Use a #RB27 bearing for a 1/8" deep bead. #RB20 and #RB27 bearings sold separately. Maximum spread between the top and bottom of fully shimmed cutters is 1-5/8".
Bits are 1/2" shank with 2 flutes and carbide tips. Made by Whiteside. USA
|
1/4" R X 1-3/8" D X 3-3/4" OAL
Cuts full thickness profile in a single pass. Bit has an adjustable cutting length to simultaneously create a top and bottom round over on materials of different thickness. Add or remove shims (included) to adjust length.
Includes 7/8" OD center pilot bearing (#RB5) for flush round over. Use a #RB20 bearing for 1/16" deep bead. Use a #RB27 bearing for a 1/8" deep bead. #RB20 and #RB27 bearings sold separately. Maximum spread between the top and bottom of fully shimmed cutters is 1-5/8".
Bits are 1/2" shank with 2 flutes and carbide tips. Made by Whiteside. USA
|
 15 DEGREE X 1/2" CL X 1/2" CH
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork; trim laminates; or create multi-sided boxes. Use bits #R2298 and R2300A for trimming laminates. Use bit #R2308 for making 6 sided boxes. 2 flute. Carbide tipped. Made by Whiteside. USA
|
25 DEGREE X 9/16" CL X 1/2" CH
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork; trim laminates; or create multi-sided boxes. Use bits #R2298 and R2300A for trimming laminates. Use bit #R2308 for making 6 sided boxes. 2 flute. Carbide tipped. Made by Whiteside. USA
|
7 DEGREE X 3/8" CL X 3/8" CH
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork; trim laminates; or create multi-sided boxes. Use bits #R2298 and R2300A for trimming laminates. Use bit #R2308 for making 6 sided boxes. 2 flute. Carbide tipped. Made by Whiteside. USA
|
15 DEGREE X 1/4" CL X 1/4" CH
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork; trim laminates; or create multi-sided boxes. Use bits #R2298 and R2300A for trimming laminates. Use bit #R2308 for making 6 sided boxes. 2 flute. Carbide tipped. Made by Whiteside. USA
|
30 DEGREE X 7/8" CL X 3/4" CH
Place an attractive, clean lined, bevel edge on furniture, moldings, and millwork; trim laminates; or create multi-sided boxes. Use bits #R2298 and R2300A for trimming laminates. Use bit #R2308 for making 6 sided boxes. 2 flute. Carbide tipped. Made by Whiteside. USA
|
 5/32" R X 1-1/8" D X 9/16" CL - 1/4" SHANK
The classic Roman Ogee profile. Useful for a wide variety of edging applications. R2200 & R2201 are 1/4" shank. R2202, R2203, & R2210 are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1/4" R X 1-1/2" D X 11/16" CL - 1/4" SHANK
The classic Roman Ogee profile. Useful for a wide variety of edging applications. R2200 & R2201 are 1/4" shank. R2202, R2203, & R2210 are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
5/32" R X 1-1/8" D X 9/16" CL - 1/2" SHANK
The classic Roman Ogee profile. Useful for a wide variety of edging applications. R2200 & R2201 are 1/4" shank. R2202, R2203, & R2210 are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1/4" R X 1-1/2" D X 11/16" CL - 1/2" SHANK
The classic Roman Ogee profile. Useful for a wide variety of edging applications. R2200 & R2201 are 1/4" shank. R2202, R2203, & R2210 are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
3/8" R X 2" D X 1" CL - 1/2" SHANK
The classic Roman Ogee profile. Useful for a wide variety of edging applications. R2200 & R2201 are 1/4" shank. R2202, R2203, & R2210 are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
20 Total Results
Showing Results from 1 to 20
|