Search Hartville Tool
Router Bits -- Roundover
|
|
|
[«] « prev | 1 | 2 3 | next » [»] 47 Total Results
Showing Results from 1 to 20
|
 3/4" R X 2" D X 1" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2109) with 1/2" radius Cove Bit (#R1805) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1/2" R X 1-1/2" D X 3/4" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2109) with 1/2" radius Cove Bit (#R1805) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
3/8" R X 1-1/4" D X 5/8" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2109) with 1/2" radius Cove Bit (#R1805) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
5/16" R X 1-1/16" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2109) with 1/2" radius Cove Bit (#R1805) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1/4" R X 1" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2109) with 1/2" radius Cove Bit (#R1805) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
3/16" R X 7/8" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2109) with 1/2" radius Cove Bit (#R1805) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
 1/2" R X 1-1/2" D X 3/4" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2104) with 1/2" radius Cove Bit (#R1802) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
3/8" R X 1-1/4" D X 5/8" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2104) with 1/2" radius Cove Bit (#R1802) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
5/16" R X 1-1/16" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2104) with 1/2" radius Cove Bit (#R1802) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1/4" R X 1" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2104) with 1/2" radius Cove Bit (#R1802) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
5/32" R X 13/16" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2104) with 1/2" radius Cove Bit (#R1802) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1/8" R X 3/4" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2104) with 1/2" radius Cove Bit (#R1802) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1/16" R X 5/8" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2104) with 1/2" radius Cove Bit (#R1802) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
3/16" R X 7/8" D X 1/2" CL
Put a classic beaded edge on table tops, drawer fronts, panel edges, moldings, and trim. Combining a 1/2" radius Bead profile bit (#R2104) with 1/2" radius Cove Bit (#R1802) makes a perfectly matched set for creating rule joints on drop leaf table tops made with 3/4" stock. 2 flute. Carbide tipped. Made by Whiteside. USA
|
 3/8"R X 1/4" D X 1" D - 1/2" SHANK
These larger grooving bits are ideal for raised panel effects in doors, and for adding a bold accent to furniture or large work pieces. Increasing the depth of cut of these bits adds a nice stepped effect to the round over. They also make nice edge profiles with the aid of a router table and fence.
The bits can be modified for following templates. Select a bearing with the same ID (internal diameter) as the shank on the bit. The OD (outer diameter) of the bit should be the same size or larger than the large diameter of the bit. Use Lock Collar #RLC14 for 1/4" shank bits and Lock Collar #RLC12 for 1/2" shank bits.
R2051 is 1/4" shank. R2055 and R2057 are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
1/4" R X 1/4" PD X 3/4" D - 1/2" SHANK
These larger grooving bits are ideal for raised panel effects in doors, and for adding a bold accent to furniture or large work pieces. Increasing the depth of cut of these bits adds a nice stepped effect to the round over. They also make nice edge profiles with the aid of a router table and fence.
The bits can be modified for following templates. Select a bearing with the same ID (internal diameter) as the shank on the bit. The OD (outer diameter) of the bit should be the same size or larger than the large diameter of the bit. Use Lock Collar #RLC14 for 1/4" shank bits and Lock Collar #RLC12 for 1/2" shank bits.
R2051 is 1/4" shank. R2055 and R2057 are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
3/16" R X 1/4" PD X 5/8" D - 1/4" SHANK
These larger grooving bits are ideal for raised panel effects in doors, and for adding a bold accent to furniture or large work pieces. Increasing the depth of cut of these bits adds a nice stepped effect to the round over. They also make nice edge profiles with the aid of a router table and fence.
The bits can be modified for following templates. Select a bearing with the same ID (internal diameter) as the shank on the bit. The OD (outer diameter) of the bit should be the same size or larger than the large diameter of the bit. Use Lock Collar #RLC14 for 1/4" shank bits and Lock Collar #RLC12 for 1/2" shank bits.
R2051 is 1/4" shank. R2055 and R2057 are 1/2" shank. 2 flute. Carbide tipped. Made by Whiteside. USA
|
 1/2" R X 1-3/4" D X 3/4" CL
Make Round Overs & More! Conventional beading bits only cut a shallow, 1/16" deep bead. These versatile multi bearing and bit sets expand your creative boundaries.
Use them to rout everything from a smooth round over to extra deep beads that create a more pronounced edge on larger pieces. Each set includes a bit, hex key, and 4 bearings. All sets are 2 fluted and carbide tipped with 1/2" shanks. Made by Whiteside. USA
|
3/8" R X 1-1/2" D X 5/8" CL
Make Round Overs & More! Conventional beading bits only cut a shallow, 1/16" deep bead. These versatile multi bearing and bit sets expand your creative boundaries.
Use them to rout everything from a smooth round over to extra deep beads that create a more pronounced edge on larger pieces. Each set includes a bit, hex key, and 4 bearings. All sets are 2 fluted and carbide tipped with 1/2" shanks. Made by Whiteside. USA
|
1/4" R X 1-1/4" D X 1/2" CL
Make Round Overs & More! Conventional beading bits only cut a shallow, 1/16" deep bead. These versatile multi bearing and bit sets expand your creative boundaries.
Use them to rout everything from a smooth round over to extra deep beads that create a more pronounced edge on larger pieces. Each set includes a bit, hex key, and 4 bearings. All sets are 2 fluted and carbide tipped with 1/2" shanks. Made by Whiteside. USA
|
[«] « prev | 1 | 2 3 | next » [»] 47 Total Results
Showing Results from 1 to 20
|