|
|
|
|
Search Hartville Tool
Saw Accessories |
[«] « prev | 1 | 2 3 4 5 | next » [»] 93 Total Results
Showing Results from 1 to 20
|  Saw-Jaw Blade Lock & Case
Saw-Jaw makes saw blade changes more hassle-free than ever. It surrounds blades then closes down securely with a ratchet style latch. Internal nibs keep the blade from rotating during removal and installation. Outer tabs prevent the blade from dropping out. Helps keep blade tips from getting chipped and hands from getting cut. Excellent for safely storing blades or transporting them to a sharpening service. Works on any 10" blade. USA 
|  Freud Dial-A-Width Dado Set - 6"
Freud's Dial-A-Width Dado Set is a stacked dado set, but the shims have been replaced with a patented dial system, which allows users to adjust the width of cut via a micro-adjusting dial hub. Each "click" of the dial adjusts the blade by .004"; with an adjustable width range of 1/4" to 29/32". Ordinary dado cutters wobble in use, producing a rounded groove, and often have multiple components to line up when mounting. The Dial-A-Width Dado Set mounts easily with no loose components to hassle with, and the adjustable-hub allows users to fine tune the width of the dado without ever removing the dado cutter from the table saw.
The set comes with 5 chippers (Four at 1/8" and one at 3/32"). When combined with the 3/32" chippers, the hub ensures a super precise fit-even on undersized plywood. The MicroGrain carbide is designed and manufactured specifically for splinter-free, flat bottom grooves in a variety of materials. Oversized teeth allow for longer cutting life between sharpenings, as well as more re-sharpenings. The unique shear angles of the teeth slice through any material with razor sharp precision. Covered by Freud's limited lifetime warranty. Italy
| Freud Dial-A-Width Dado Set - 8"
Freud's Dial-A-Width Dado Set is a stacked dado set, but the shims have been replaced with a patented dial system, which allows users to adjust the width of cut via a micro-adjusting dial hub. Each "click" of the dial adjusts the blade by .004"; with an adjustable width range of 1/4" to 29/32". Ordinary dado cutters wobble in use, producing a rounded groove, and often have multiple components to line up when mounting. The Dial-A-Width Dado Set mounts easily with no loose components to hassle with, and the adjustable-hub allows users to fine tune the width of the dado without ever removing the dado cutter from the table saw.
The set comes with 5 chippers (Four at 1/8" and one at 3/32"). When combined with the 3/32" chippers, the hub ensures a super precise fit-even on undersized plywood. The MicroGrain carbide is designed and manufactured specifically for splinter-free, flat bottom grooves in a variety of materials. Oversized teeth allow for longer cutting life between sharpenings, as well as more re-sharpenings. The unique shear angles of the teeth slice through any material with razor sharp precision. Covered by Freud's limited lifetime warranty. Italy
|  Freud Super Dado Set - 6"
Cuts dados in everything from veneered plywoods and laminates to solid wood, chip and splinter free with a super smooth dado bottom and has the flexibility of an adjustable dado to handle today's undersized plywood. The SD500 Series were the first dadoes to include a 3/32" thick chipper. This allows the cut width to be adjusted in 1/32" increments and doubles the number of slot widths available. Many plywoods are being manufactured 1/32" undersized from the nominal size and this allows you to cut dadoes that will fit these materials with less shimming. A shim set is included with the dado for fine adjustments. The Square Tooth(TM) design utilizes a shorter and thicker tooth which reduces drag in the cut and reduces the materials guiding effect. The Square Tooth(TM) design also increases the number of sharpenings you can obtain. These sets use an extra thick and stiff outside plate, eliminating the hub. The gullet design provides maximum chip ejection. Both of these features prevent chip buildup within the stack. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood, or hardwood. Italy
| Freud Super Dado Set - 8"
Cuts dados in everything from veneered plywoods and laminates to solid wood, chip and splinter free with a super smooth dado bottom and has the flexibility of an adjustable dado to handle today's undersized plywood. The SD500 Series were the first dadoes to include a 3/32" thick chipper. This allows the cut width to be adjusted in 1/32" increments and doubles the number of slot widths available. Many plywoods are being manufactured 1/32" undersized from the nominal size and this allows you to cut dadoes that will fit these materials with less shimming. A shim set is included with the dado for fine adjustments. The Square Tooth(TM) design utilizes a shorter and thicker tooth which reduces drag in the cut and reduces the materials guiding effect. The Square Tooth(TM) design also increases the number of sharpenings you can obtain. These sets use an extra thick and stiff outside plate, eliminating the hub. The gullet design provides maximum chip ejection. Both of these features prevent chip buildup within the stack. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood, or hardwood. Italy
|  Brass Bar Set-Up Gauge Kit - 2-1/2"
Use these precision machined brass bars to determine depth of cut, bit height, fence and blade distance, etc. Use individually or stack them together to combine measurements. Won't damage tool edges. Each set includes five bars measuring 1/8", 3/16", 1/4", 3/8", and 1/2" square. Sets come in 2 bar lengths - 2-1/2" & 4". Made by Whiteside, USA.
|  The Table Saw Book
A comprehensive reference for that shop tool cornerstone - the table saw. A professional furniture builder for over 20 years, author Kelly Mehler gained wide respect for his expertise on the table saw through his first book over 10 years ago. That respect has only deepened with the release of this completely updated and revised version.
This in-depth book starts with table saw selection, then goes right through basics of set-up, tune-up, and maintenance, to foundational cutting methods, special techniques, precision joinery, and labor saving jigs. 202 pages chock full of first rate photographs, diagrams, and expert advice gained from hard-earned experience. Very highly recommended! Softcover. USA.
|  45/90 Brass Angle Block
Made to our specifications, this beautiful and highly precise, solid brass angle block will find quite a few uses around the shop. A substantial 3/8" thick, it easily stands on any flat surface. Most importantly, it is accurate to within + or - 0.001" over the length of each side. Set table saw blade or jointer fences to a perfect 90 degrees, be sure band saw or drill press tables are square to the blade or bit, or even use it to check try squares. Block is approx. 2-7/8" high. Super accessory for our X-Point Power Tool Gauge (#78401). India
|  HTC Work Roller w/ Bracket - 13"
Make your own custom work supports, pedestal rollers, roller tables, or outfeed tables. Ball bearing construction for smooth rolling action. 1-3/8" diameter tubes are galvanized for rust and corrosion resistance. Rollers have spring loaded axles for easy installation. USA
|  T-Slot Jig & Fixture Kit
Make your own jigs & hold-downs. Excellent for attaching feather boards, hold-downs, and special jigs to your table saw, router table, disc sander, or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot. T-Slot Bars (A) are 1" long and are designed for "t-shaped" miter gauge slots. The bars pull up tight in the slot as you tighten the knobs. Square-Slot Bars (B) fit both square and t-shaped miter gauge slots. Square-Slot Bars are 2-1/2" long and expand in the slot as you tighten the knobs. Each kit includes 2 each: jig bars, knobs with screws, and washers. China
| Square Slot Jig & Fixture Kit
Make your own jigs & hold-downs. Excellent for attaching feather boards, hold-downs, and special jigs to your table saw, router table, disc sander, or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot. T-Slot Bars (A) are 1" long and are designed for "t-shaped" miter gauge slots. The bars pull up tight in the slot as you tighten the knobs. Square-Slot Bars (B) fit both square and t-shaped miter gauge slots. Square-Slot Bars are 2-1/2" long and expand in the slot as you tighten the knobs. Each kit includes 2 each: jig bars, knobs with screws, and washers. China
|  Hart Design Universal Tool Fence - 36"
This 36" long x 3-1/4" high solid aluminum fence is perfect for drill press tables, miter saws, radial arm saws....you name it. T-slots in the fence allow sub-fences, stops, jigs, and hold-downs to be mounted to the top and face. Patent pending fence bracket design allows fence to be squared to the work surface. Canted slot makes tape measure easy to read. Permanently bolt in place, or make it adjustable with T-Tracks (available separately, see item 10596). Includes rear angle brackets, cam levers, self-adhesive measuring tape, and t-bolts. Optional Micro-adjustable Stop (53761) available. China
|  Saw Blade Lube
Compounded to keep band saw, scroll saw, coping saw, and other saw blades from clogging with chips or pitch. Prolongs blade life, and produces smoother, quieter cuts. 8" x 1" stick. USA
|  GR 200 GRR-Ripper
This customizable stock control jig has mulitple non-slip grooved pads to provide real gripping power for feeding stock on your table saw, router table, jointer, or shaper. It encloses stock to protect hands and fingers, and prevent kick-back.
On the table saw it tightly holds both sides of the stock parallel to the blade throughout the operation, enabling you to cut so straight you can use it to joint smooth edges on a table saw. Rip stock as narrow as 1/4". Cross-cut and re-saw with accurate repeatability.
On the router table you can use it to safely guide stock past router bits that don't have a pilot bearing, or use it to hold and guide small or irregularly shaped pieces. Prevents burning and snipe, and reduces waste. Colors may vary. Patent pending. USA
Grr-Ripper Handle Bridge Set
One of the few drawbacks to the Grr-Ripper System (#76803) has been the need to adjust handle position to match the cutting operation. Once installed, the arch shaped Handle Bridge eliminates the need for these adjustments. Downward pressure is placed squarely over the center of the jig and spread evenly across the whole width of the GRR-Ripper body through the 4 contacting points, thereby providing better control. USA
|  Wood Haven Deluxe Miter Gauge
Both gauges are calibrated to an amazing 1/30th of a degree (2 minutes), and come with "snug plugs" to eliminate sloppy fits in the miter gauge slot. Table bars for both gauges are 3/8" x 3/4" x 17-3/4". USA
Deluxe Gauge: Can be positioned at any angle from zero to 90 degrees, and has positive stops at zero, 10, 15, 22-1/2, 30, 45 and 60 degrees, with bronze bushings installed at the most critical angles. The 2" high head of the gauge is machined square to the miter bar, both vertically and horizontally. The bar has removable washers at both front and rear for increased stability.
45/90 Gauge: All the same accuracy as the Deluxe Gauge, but pre-set to cut only at 45 & 90 degrees. However, these are the most used angles, probably 95% of all cuts. An excellent basic gauge.
| Wood Haven 45/90 Miter Gauge
Both gauges are calibrated to an amazing 1/30th of a degree (2 minutes), and come with "snug plugs" to eliminate sloppy fits in the miter gauge slot. Table bars for both gauges are 3/8" x 3/4" x 17-3/4". USA
Deluxe Gauge: Can be positioned at any angle from zero to 90 degrees, and has positive stops at zero, 10, 15, 22-1/2, 30, 45 and 60 degrees, with bronze bushings installed at the most critical angles. The 2" high head of the gauge is machined square to the miter bar, both vertically and horizontally. The bar has removable washers at both front and rear for increased stability.
45/90 Gauge: All the same accuracy as the Deluxe Gauge, but pre-set to cut only at 45 & 90 degrees. However, these are the most used angles, probably 95% of all cuts. An excellent basic gauge.
|  X-Point Power Tool Set-Up Gauge
Imagine every blade running true; every fence lining up perfectly; every angle set exactly; every machine cutting smoothly, quietly, and with perfect accuracy. With the Redline X-Point Power Tool Set-Up Gauge it's no dream.
This precise, professional quality measuring instrument is designed to provide power tool setup readings to within 0.001". It eliminates performance robbing set-up problems that would be nearly invisible to the naked eye. With the X-Point you'll soon find your table saw, band saw, jointer, and drill press more accurate and more enjoyable to use than ever before. Use it to set the heel & toe of table saw blades; check table saw miter slot and fence alignments; set blade, fence, and miter gauge angles; check for arbor or spindle run-out; set jointer blades; or even check your shop squares to see just how square they are. Once you have it you'll be sure to find even more uses.
The 3 point adjustable bearing system allows you to move the gauge in the miter gauge slot without slop or loss of accuracy. The base of the gauge also contains 2 powerful rare earth magnets, so it stays put when using it on jointer beds or drill press tables. Brass Angle Block (#85883) is optional, but helpful. Set includes base, dial indicator, instruction manual and protective molded plastic case. Solid aluminum anodized body. China
|  General Universal Mobile Base
When workshop space is at a premium, flexibility is the key. With a 500 lb. weight capacity and 1" incremental adjustability, this handy universal mobile base makes it easy to mobilize just about any floor type power tool in the shop. Includes heavy duty adjustable steel frame, tough 3" wheels, 2 foot levers with locking mechanisms, and rubber leveling feet. Specs: 11" x 11" Min. square size; 35.2" x 35.2" Max. square size; 17.1" x 11" Min. rectangular size; 51" x 19" Max. rectangular size. A real difference maker in the shop. Taiwan
|  Kreg Flip Stop
The Kreg Flip Stop is a beefy, professional quality saw fence stop. This all aluminum stop will put your cuts right on the money time after time. Flips out of the way if you need to make an odd cut in the middle of a run. Patented curved design also lets you slide the work piece right under it without changing the setting. Built in cursor for hair line accuracy. Works with Fast T-Trak (Half Track), Kreg Top-Trak, and Kreg Heavy Duty Trak, and the Kreg Precision Miter Gauge (#63174). Track sold seperately. USA
|  Merlin MTK 150 Splitter
So easy to use, it just seems like magic. Once installed, you'll never have to grab a wrench or remove the throat plate to take it off or put it on. A small hole drilled in the saw throat plate lets you easily access the release button with a pencil or dowel. The sturdy thin kerf (0.075" thick) splitter can be perfectly aligned with the blade, keeping saw kerfs from pinching and binding. It provides double kickback protection with 2 sets of anti-kickback pawls. Merlin mounting brackets attach easily to the pre-existing holes for your saw's factory supplied splitter. Canada
MTK 150 (82537) - Right Tilt Jet JWTS-10 & General Int. 50-175 Contractors
MTK 200 (82539) - Powermatic 66-TA left tilt
MTK 120 (82543) - Right Tilt 10" Delta Uni-Saw & Jet Xacta Saws
MTK 130 (82549) - Delta 10" Contractor (Discontinued)
|
[«] « prev | 1 | 2 3 4 5 | next » [»] 93 Total Results
Showing Results from 1 to 20
|
|
|
| |
|
|
|
|
|
|
|