|
|
|
|
Search Hartville Tool
T-Track |
[«] « prev | 1 | 2 | next » [»] 38 Total Results
Showing Results from 1 to 20
|  45/90 Brass Angle Block
Made to our specifications, this beautiful and highly precise, solid brass angle block will find quite a few uses around the shop. A substantial 3/8" thick, it easily stands on any flat surface. Most importantly, it is accurate to within + or - 0.001" over the length of each side. Set table saw blade or jointer fences to a perfect 90 degrees, be sure band saw or drill press tables are square to the blade or bit, or even use it to check try squares. Block is approx. 2-7/8" high. Super accessory for our X-Point Power Tool Gauge (#78401). India 
|  Hart Design Universal Tool Fence - 36"
This 36" long x 3-1/4" high solid aluminum fence is perfect for drill press tables, miter saws, radial arm saws....you name it. T-slots in the fence allow sub-fences, stops, jigs, and hold-downs to be mounted to the top and face. Patent pending fence bracket design allows fence to be squared to the work surface. Canted slot makes tape measure easy to read. Permanently bolt in place, or make it adjustable with T-Tracks (available separately, see item 10596). Includes rear angle brackets, cam levers, self-adhesive measuring tape, and t-bolts. Optional Micro-adjustable Stop (53761) available. China
|  X-Point Power Tool Set-Up Gauge
Imagine every blade running true; every fence lining up perfectly; every angle set exactly; every machine cutting smoothly, quietly, and with perfect accuracy. With the Redline X-Point Power Tool Set-Up Gauge it's no dream.
This precise, professional quality measuring instrument is designed to provide power tool setup readings to within 0.001". It eliminates performance robbing set-up problems that would be nearly invisible to the naked eye. With the X-Point you'll soon find your table saw, band saw, jointer, and drill press more accurate and more enjoyable to use than ever before. Use it to set the heel & toe of table saw blades; check table saw miter slot and fence alignments; set blade, fence, and miter gauge angles; check for arbor or spindle run-out; set jointer blades; or even check your shop squares to see just how square they are. Once you have it you'll be sure to find even more uses.
The 3 point adjustable bearing system allows you to move the gauge in the miter gauge slot without slop or loss of accuracy. The base of the gauge also contains 2 powerful rare earth magnets, so it stays put when using it on jointer beds or drill press tables. Brass Angle Block (#85883) is optional, but helpful. Set includes base, dial indicator, instruction manual and protective molded plastic case. Solid aluminum anodized body. China
|  Kreg Flip Stop
The Kreg Flip Stop is a beefy, professional quality saw fence stop. This all aluminum stop will put your cuts right on the money time after time. Flips out of the way if you need to make an odd cut in the middle of a run. Patented curved design also lets you slide the work piece right under it without changing the setting. Built in cursor for hair line accuracy. Works with Fast T-Trak (Half Track), Kreg Top-Trak, and Kreg Heavy Duty Trak, and the Kreg Precision Miter Gauge (#63174). Track sold seperately. USA
|  Micro-Adjustable Stop
Fits our red Hart Design drill press table, router table & miter gauge cut-off fences. The micro-adjusting feature allows you to tweak your settings for dead-on accuracy. Solid aluminum, black anodized. China
|  100 Pc. Knob Set
Did you ever want to make a jig or apparatus and you just couldn't find the proper knobs? Well, here they are - we've collected all the knobs you'll ever need. Made from recycled plastic, they are many times stronger than standard phenolic knobs. Female knobs all have through holes. USA
SPECIAL OFFER - 100 Pc. Knob Set - $69.00. (4 of each knob that we offer) You save $20.00!!
|  10-24 T-Nut - 10 Pk. (A) *
These special nuts, bolts, and inserts will let you build a number of jigs and fixtures in your shop. Great for building T-track units. T-slot nuts, T-slot bolts, screw-in wood inserts - if you need it, you’ll find it here. USA
Note: Hardware marked with an asterisk (*) will work in our t-track slots without modification.
| 1/4-20 Single T-Nut - 10 Pk. (B)
These special nuts, bolts, and inserts will let you build a number of jigs and fixtures in your shop. Great for building T-track units. T-slot nuts, T-slot bolts, screw-in wood inserts - if you need it, you’ll find it here. USA
Note: Hardware marked with an asterisk (*) will work in our t-track slots without modification.
| 1/4-20 Double T-Nut - 10 Pk. (C)
These special nuts, bolts, and inserts will let you build a number of jigs and fixtures in your shop. Great for building T-track units. T-slot nuts, T-slot bolts, screw-in wood inserts - if you need it, you’ll find it here. USA
Note: Hardware marked with an asterisk (*) will work in our t-track slots without modification.
| 5/16-18 Offset T-Nut - 10 Pk. (D)
These special nuts, bolts, and inserts will let you build a number of jigs and fixtures in your shop. Great for building T-track units. T-slot nuts, T-slot bolts, screw-in wood inserts - if you need it, you’ll find it here. USA
Note: Hardware marked with an asterisk (*) will work in our t-track slots without modification.
| 10-24x1-1/4 T-Bolt - 10 Pk. (E) *
These special nuts, bolts, and inserts will let you build a number of jigs and fixtures in your shop. Great for building T-track units. T-slot nuts, T-slot bolts, screw-in wood inserts - if you need it, you’ll find it here. USA
Note: Hardware marked with an asterisk (*) will work in our t-track slots without modification.
| 1/4-20x1 T-Bolt - 10 Pk. (F) *
These special nuts, bolts, and inserts will let you build a number of jigs and fixtures in your shop. Great for building T-track units. T-slot nuts, T-slot bolts, screw-in wood inserts - if you need it, you’ll find it here. USA
Note: Hardware marked with an asterisk (*) will work in our t-track slots without modification.
| 10-24 Threaded Insert - 10 Pk. (G)
These special nuts, bolts, and inserts will let you build a number of jigs and fixtures in your shop. Great for building T-track units. T-slot nuts, T-slot bolts, screw-in wood inserts - if you need it, you’ll find it here. USA
Note: Hardware marked with an asterisk (*) will work in our t-track slots without modification.
|  Deluxe T-Track Hold Down
Slide the hex bolt head of these hold-downs into any of our t-tracks. Then tightly position and hold work anywhere along the length of the track. Each unit includes a solid aluminum hold-down, a bolt, and a 1/4-20 knob. China
Deluxe Hold-Down: Uses a 1/4-20 x 3" bolt and works on material up to 2-1/2" thick.
Mini Hold-Down: Uses a 1/4-20 x 2-1/2" bolt and works on material up to 1" thick.
| Mini T-Track Hold Down
Slide the hex bolt head of these hold-downs into any of our t-tracks. Then tightly position and hold work anywhere along the length of the track. Each unit includes a solid aluminum hold-down, a bolt, and a 1/4-20 knob. China
Deluxe Hold-Down: Uses a 1/4-20 x 3" bolt and works on material up to 2-1/2" thick.
Mini Hold-Down: Uses a 1/4-20 x 2-1/2" bolt and works on material up to 1" thick.
| Extra Bolt - 1/4-20 x 3"
Slide the hex bolt head of these hold-downs into any of our t-tracks. Then tightly position and hold work anywhere along the length of the track. Each unit includes a solid aluminum hold-down, a bolt, and a 1/4-20 knob. China
Deluxe Hold-Down: Uses a 1/4-20 x 3" bolt and works on material up to 2-1/2" thick.
Mini Hold-Down: Uses a 1/4-20 x 2-1/2" bolt and works on material up to 1" thick.
| Extra Knob - 2-Wing 1/4-20 Female
Slide the hex bolt head of these hold-downs into any of our t-tracks. Then tightly position and hold work anywhere along the length of the track. Each unit includes a solid aluminum hold-down, a bolt, and a 1/4-20 knob. China
Deluxe Hold-Down: Uses a 1/4-20 x 3" bolt and works on material up to 2-1/2" thick.
Mini Hold-Down: Uses a 1/4-20 x 2-1/2" bolt and works on material up to 1" thick.
|  FastTrak Half Track - 18"
Mount Half-Track to the top of wooden fences in a variety of ways to custom make integrated stop/measuring systems. Ideal for precise measuring and repetitive operations on machine tools like miter saws, chop saws, radial arm saws, or miter gauges, router table, or drill press fences. The top of the track is slotted for slipping in a 1/2" wide Stanley style metal measuring tape. The face of the track is recessed for installation of a 1/2" wide self adhesive measuring tape. USA
Kreg Flip Stop (53615) - A beefy, professional quality saw fence stop that will put your cuts right on the money time after time. Flips out of the way if you need to make an odd cut in the middle of a run. Patented curved design also lets you slide the work piece right under it without changing the setting. All items sold separately. USA
| FastTrak Half Track - 24"
Mount Half-Track to the top of wooden fences in a variety of ways to custom make integrated stop/measuring systems. Ideal for precise measuring and repetitive operations on machine tools like miter saws, chop saws, radial arm saws, or miter gauges, router table, or drill press fences. The top of the track is slotted for slipping in a 1/2" wide Stanley style metal measuring tape. The face of the track is recessed for installation of a 1/2" wide self adhesive measuring tape. USA
Kreg Flip Stop (53615) - A beefy, professional quality saw fence stop that will put your cuts right on the money time after time. Flips out of the way if you need to make an odd cut in the middle of a run. Patented curved design also lets you slide the work piece right under it without changing the setting. All items sold separately. USA
| FastTrak Half Track - 36"
Mount Half-Track to the top of wooden fences in a variety of ways to custom make integrated stop/measuring systems. Ideal for precise measuring and repetitive operations on machine tools like miter saws, chop saws, radial arm saws, or miter gauges, router table, or drill press fences. The top of the track is slotted for slipping in a 1/2" wide Stanley style metal measuring tape. The face of the track is recessed for installation of a 1/2" wide self adhesive measuring tape. USA
Kreg Flip Stop (53615) - A beefy, professional quality saw fence stop that will put your cuts right on the money time after time. Flips out of the way if you need to make an odd cut in the middle of a run. Patented curved design also lets you slide the work piece right under it without changing the setting. All items sold separately. USA
|
[«] « prev | 1 | 2 | next » [»] 38 Total Results
Showing Results from 1 to 20
|
|
|
| |
|
|
|
|
|
|
|