Fluid level gauge mounts on side wall of reservoirs up to ¿in. wall thickness. Metal cover protects gauge from damage. Includes thermometer. Mounts with hollow ¿in.-13 bolts on 5in. centers. 6.5in.H x 1.5in.W x 2.2in.D. . . .
Return line filter assembly with 1-1/4in. NPT ports with bypass. Includes 10 micron filter. Assembly is 5in. diameter x 9in. long. Use with our 22 GPM two-stage pump. . . .
Return line filter assembly with 3/4in. NPT ports with bypass for cold start protection. Includes 10 micron filter for optimum system cleanliness. This filter is typically located in the return line to the reservoir. Recommended for use with Suction Strainer 4010 or 4011. Fits systems with 2 to 25 GPM pumps. Use wit . . .
Suction line filter assembly with 3/4in. NPT ports with bypass for cold start protection. Includes 149 micron stainless steel mesh element. This filter may be used where it is not possible to use an in-tank suction strainer. Not for use with pumps larger than 15 GPM. Strainer Element and Housing Measure: 7 1/2in . . .
Suction strainer. Mounts through-the-wall of the reservoir using a 1-1/2in. NPT weld flange (not included). Suction port is 3/4in. NPT. 4in. long strainer has 100 mesh (149 micron) stainless steel screen. Fits our 2.8 and 4.8 gallon hydraulic tanks. Not for use with pumps over 10 GPM. One piece unit Reco . . .
Suction strainer. Mounts through-the-wall of the reservoir using a 2in. NPT weld flange (not included). Suction port is 1-1/4in. NPT. 8in. long strainer has 100 mesh (149 micron) stainless steel screen. Fits our 7, 10 and 12 gallon hydraulic tanks. Not for use with pumps over 25 GPM. . . .
