Tuthill Diesel Fuel Transfer Pump with Suction Pipe — 12 Volt, 10 GPM, Model# FR1616 The Tuthill diesel fuel transfer pump delivers diesel fuel or light oils at up to 10 GPM. HP: 1/5, Flow (GPM): 10, Speed (RPM): 2800, Amps: 20, Max. Suction Lift (ft.): 6.5, Inlet Port (in.): 3/4, Outlet Port (in.): 3/4, Duty Cycle: 30 Min., Self-Priming: Yes, Bypass Valve: Yes, Seal Type: Lip, Nozzle Type: Swivel, Hose (in. x ft.): 3/4 x 8, Dimensions L x W x H (in.): 7 1/8 x 3 3/4 x 5 1/8 Cast iron construction 12V DC Steel telescoping suction pipe 8-ft. PVC discharge hose Polypropylene nozzle with swivel Strainer to prevent contaminants from entering pump 3/4in. hose barbs
Woodward-Fab Pipe/Tube Bending Kit, Model# SPBENDKIT The Woodward-Fab pipe/tube bending kit is an easy-to-operate device that makes kink-free bends. Bending Applications: Round tubing, square tubing, conduit pipe, round rod, Dies Included: Yes, Dimensions L x W x H (in.): 20 x 16 x 7 Cast-iron construction Threaded adjustment Extension handle 6 round dies (3/8in., 1/2in., 5/8in., 9/16in., 3/4in. and 7/8in.) 2 square tube dies (3/4in. and 1in.) Storage case
Northern Industrial Hydraulic Pipe Bending Machine — 2in., Model# 2702S076 Designed for bending thick-walled pipes. Hydraulic: Yes, Working Pressure (PSI): 6,686 to 7,258, Max. PSI: 6,260, Dies Included: 6 Maximum load: 18,000 lbs. Bends pipe with included 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in. and 2in. bending dies Max travel 9 27/32in. Crimp range 21.5–60 mm Tubing wall thickness: 2.75–4.5mm Hydraulic oil tank volume: 1 1/4 quarts (1.2L) Three casters allow for easier setup
Northern Industrial Pipe Threader — 6-Pc. Set Tool steel dies are machined and hardened to cut clean, accurate NPT threads on 1/4in., 3/8in., 1/2in., 3/4in., 1in. and 1 1/4in. pipe. Ratchet handle. Molded carry case. Handles up to (in.): 1/4 to 1 1/4, Dies (qty.): 6 Will work on black iron and gas line pipe ID of Ratchet: 1 3/4in.
Northern Industrial Male Pipe Taps — 6-Pc. Set Includes 1/4in., 3/8in., 1/2in., 3/4in., 1in. and 1 1/4in. sizes. SAE Set: Yes, Metric Set: No, Pieces (qty.): 6, Taps (qty.): (6) 1/4 in., 3/8 in., 1/2 in., 3/4 in., 1 in., 1 1/4 in.
Northern Industrial Hydraulic Pipe Bender — 12-Ton Bends virtually all types of pipe except conduit. Top rollers adjust for 90° bend. Hydraulic: Yes, Bending Applications: Black / Galvanized pipe, Max. Bending Capacity - Round (In. dia.): 2, Dimensions L x W x H (in.): 24 x 6 1/4 x 21 1/2 12-ton Bends schedule 40 and 80 (not conduit) Bends pipe in 6 diameters: 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in. and 2in.
Northern Industrial Hydraulic Pipe Bender — 16-Ton More powerful! Bends pipe in 8 diameters. Hydraulic: Yes, Working Pressure (PSI): 16 Ton, Bending Applications: Schedule 40 and 80 black or galvanized pipe, Dies Included: 8 16-ton Bends schedule 40 and 80 black or galvanized pipe (not conduit) Bends pipe in 8 diameters: 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in., 2in., 2 1/2in. and 3in. Bending bars can be adjusted to distances of 11 1/2in., 15 1/4in., 21 1/4in., 23 1/4in. and 27in.
Northern Industrial Air/Hydraulic Pipe Bender — 16-Ton The Northern Industrial 16-ton pipe bender. Can also bend thin-walled pipe or conduit if pipe is filled with sand and capped on both ends. Hydraulic: Yes, Working Pressure (PSI): 16 Ton, Bending Applications: Schedule 40 and 80 pipe, Max Bending Radius (deg.): 90 16-ton limit Bends schedule 40 and 80 pipe Bends 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in., 2in., 2 1/2in. and 3in. dia. pipes Bends up to 90°
Northern Industrial JUMBO Aluminum Pipe Wrenches — 3-Pc. Set Buy three sizes and save! You get the power of a large wrench with less arm fatigue. The 15in. opens to 2 1/2in., the 18in. opens to 2 1/2in. and the 24in. opens to 3in. Pieces (qty.): 3, Tool Length (in.): 14, 18, 24, Jaw Capacity (in.): 2 1/2, 2 1/2, 3, Material Type: Forged Aluminum Alloy Handle with Steel Jaws
Northern Industrial JUMBO Steel Pipe Wrenches — 3-Pc. Set When you have plumbing, steamfitting, oil field of other work that requires big jaw openings and plenty of turning power, this set of massive wrenches will do the job. Pieces (qty.): 3, Tool Length (in.): 14, 18, 24, Jaw Capacity (in.): 2, 3, 4, Material Type: Heavy Duty Steel 14in. wrench opens to 2in. 18in. wrench opens to 2 1/2in. 24in. wrench opens to 3in.
Northern Industrial Pipe Vise — 5in., Bench Mount Base AND head turn 360° and lock in any position! Combined bench and V-shaped pipe jaws are drop-forged and hardened. Jaws are 5in.W x 3 1/4in.D, open to 4in. Jaw Width (in.): 4, Jaw Depth (in.): 3 1/4, Jaw Capacity (in.): 4, Pipe Jaw: Yes, Double Look-downs: Yes, 360° Swivel Base: Yes
Klutch Heavy-Duty Portable Electric Pipe Threader Threads pipe from 1/2in to 2in. using 6 alloy steel die sets. Heavy-duty paddle switch shuts off automatically when released. Aluminum gear housing and reinforced plastic body and handle. Amps: 10, Watts: 1,200, Max. RPM: 18 - 28 (threading); 51 (reverse), Handles up to (in.): 2, Body Material: Aluminum gear housing, Power Cord (ft.): 6, Plug Type: American two cores, Dies (qty.): 6 120V AC motor Threads 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in. and 2in.
Vestil Steel Pipe Safety Bollard — 24in.H, 4 1/2in. dia., Model# BOL-24-4.5 This Vestil steel pipe safety bollard works indoors or outdoors to protect work areas, racking and personnel. U.S.A. Height (in.): 24, Outside Diameter (in.): 4 1/2, Color: Safety yellow, Finish Type: Powder coated, Material Type: Steel, Base Plate Size L x W (in.): 8 x 8, Anchor Bolt Size Dia. x L (in.): (4) 3/4 x 4 (Not included), Compatible With Item Number (s): 855268 Base plates include four pre-drilled mounting holes Welded steel construction Mounting kits and replacement caps available
Northern Industrial Ratcheting Pipe Threaders — 12-Pc. Set Handles up to (in.): 3/8 to 2, Dies (qty.): 7 Includes 7 pipe dies: 3/8in., 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in. and 2in. 3/8in. die is 18 TPI 1/2in. and 3/4in. dies are 14 TPI 1in. and 2in. dies are 11 1/2 TPI All other dies are 11 TPI Long 16in. handle provides solid leverage and features an easy reversing knob High-speed steel dies offer a clean, accurate NPT thread in 3/8in. to 2in. pipe Thread taper is 3/4in. per foot Ratcheting action makes it easy to use Replaceable cutting heads Great price on a quality tool Includes oil can and carrying case
Northern Industrial Portable Hydraulic Electric Rebar/Steel Rod Cutter The Northern Industrial portable hydraulic electric rebar/steel rod cutter cuts through steel rods and reba from 5/32in. up to 5/8in. thick quickly and easily. Power Supply: Electric, Cutting Thickness (in.): 5/32 to 5/8, Works With: Steel rods and rebar, Cutting Cycle: 2.5 sec, AC Volts: 110, Dimensions L x W x H (in.): 18 1/8 x 10 5/8 x 4 1/2 2.5-second cutting cycle Runs on 110V AC current, delivering 13 tons of cutting pressure
Northern Industrial Portable Hydraulic Electric Rebar/Steel Rod Cutter The Northern Industrial portable hydraulic electric rebar/steel rod cutter cuts through steel rods and rebar from 5/16in. up to 1in. thick quickly and easily. Power Supply: Electric, Cutting Thickness (in.): 5/16 to 1, Works With: Steel rods and rebar, Cutting Cycle: 5 sec, AC Volts: 110, Dimensions L x W x H (in.): 15 3/4 x 10 x 5 29/32 5-second cutting cycle Runs on 110V AC current, delivering 30 tons of cutting pressure
Watersource Stainless Steel Well Point — For 1 1/4in. Pipe, Model# WP3680 Penetrates all types of soil, delivering a combination of easy driving, effective sand control, corrosion resistance and strength. Three-step bonding method prevents screen from pulling back. Material: 80 gauge ductile iron pipe, Pipe Diameter (in.): 1 1/3, Length (in.): 36 Threaded octagon shoulder prevents turning while driving; forms a hole large enough to allow clearance for pipe couplings
Watersource Stainless Steel Well Point — For 2in. Pipe, Model# WPF3680 The Watersource stainless steel well point penetrates all types of soil, delivering a combination of easy driving, effective sand control, corrosion resistance and strength. Three-step bonding method prevents screen from pulling back. Material: 80-gauze ductile iron pipe, Pipe Diameter (in.): 2, Length (in.): 36 Threaded octagon shoulder prevents turning while driving; forms a hole large enough to allow clearance for pipe couplings
Liquidynamics 1:1 Stub Air-Operated Drum Pump with Pipe, Model# 32095-S2 High-volume transfer pump sized to fit 30- to 55-gallon drums and used with engine and gear oils up to 140 SAE, hydraulic fluid, transmission fluid and 100% ethylene glycol. Recommend the use of a filter regulator with gauge to control pump speed.U.S.A. Air Inlet Size (in. NPT): 1/4, Inlet Port (in.): 1, Outlet Port (in.): 1/2, Gear Ratio: 1:1 2in. NPT adjustable bung adapter A suction tube may be added to fit certain applications
[«] « prev | 1 | 2 3 4 5 6 7 8 | next » [»] 150 Total Results Showing Results from 1 to 20
Warning: require() [function.require]: URL file-access is disabled in the server configuration in /home/rowecra1/public_html/northerntool/northern_search.php on line 230
Warning: require(http://www.rowecraft.com/footer.html) [function.require]: failed to open stream: no suitable wrapper could be found in /home/rowecra1/public_html/northerntool/northern_search.php on line 230
Fatal error: require() [function.require]: Failed opening required 'http://www.rowecraft.com/footer.html' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/rowecra1/public_html/northerntool/northern_search.php on line 230
