4210 Porter-Cable 12 inch Dovetail Jig
This well-built, straightforward jig allows for cutting half-blind, rabbeted
half-blind, and sliding dovetails. Its patented alignment lines and router bit
depth stop improve accuracy and make setup quick and easy, while heavy
duty cam-type clamps with sandpaper-backed locking bars hold the
workpiece firmly in place. The jig accommodates stock from 1/4" to 1-1/8"
thick and includes a 1/2" shank, carbide-tipped dovetail bit. Additional
templates, sold separately, are available to create through dovetails, box
joints and miniature
dovetails (see More Info for details).
-> Miniature Dovetail Template - $79.99
-> Through Dovetail and Box Joint Template - $74.99
The Hang Up Shop Vac is the perfect wet/dry vacuum for your workshop. And now, take advantage of an unbeatable price. This two-stage Shop Vac® features one filter and one dust compartment for long lasting operation. Also includes a mounting bracket for easy and out-of-the-way operation, plus a 3 gallon (dry capacity) tank and 2.0 HP for just the right amount of size and power for a wood shop.
With measurements to the 1/16" on one side and the millimeter on the other, this 16' tape delivers in any situation. It also boasts a host of innovative features, including erasable notepad and tape surfaces, dual thumb and finger locks, superior ergonomics, compact rubber casing, and a stainless-steel pencil sharpener.
A simple way to get flush-fitting miters. Adjustable tool measures the corner angle, then uses innovative marking guides to pinpoint the dividing line. Just strike a line from the vertex through the intersection of the two arcs and you’re ready to cut. No guesswork, no math, just tight miters in less time. Great for simplifying crown molding installation. Also includes an adjustable small angle tool to use on outside corners for which the Miter Divider is too large.
With its unique bottle design, the Gorilla Glue pen improves control and allows you to apply the perfect amount of glue exactly where it needs to be. Fast curing, for maximum strength without a long wait. Great for delicate woodshop gluing.
The incredible durability of Crown’s elite Powdered Metallurgy tooling is now available in a 5-piece set! These top-quality gouges are made by compressing and sintering powdered metals in a hydraulic press. The result is a cutting edge that lasts up to five times as long as conventional High Speed Steel. Hardened to between 66 and 68 Rockwell, the gouges boast superior wear resistance, edge retention, and excellent sharpening qualities. This set includes a 3/4" roughing gouge, 3/8" spindle gouge, 3/8" bowl gouge, 3/16" parting tool and 3/4" skew chisel. Each gouge is fitted with a comfortable and substantial black ash handle and a heavy brass ferrule. Made in Sheffield, England.
Bring the speed and precision of computer-controlled machinery to your shop with this top value CNC system! With a table measuring 15-3/4" x 31-1/2" it’s ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene construction, it can take accidental impacts that would normally damage or destroy an aluminum or MDF machine. Optional Clamping Table features two hold-down slots for securing work anywhere along the length of the table. Compatible with the Bosch Colt Palm Router. Includes VCarve Pro software interface — a $500 value. You supply a computer with USB port, a Bosch Colt router, and a table top (router and table top also available sold separately). You connect the USB cable to the controller box and the other end to your computer.
The height of two featherboards in one easy-to-use accessory! Use this
tough polymer attachment on 1/4" T-tracks or standard miter slots to secure
tall stock for safe, clean cutting. Great for edge routing tall panels, resawing
stock on the band saw, or ensuring chatter-free cuts on the table saw.
A simple way to make freehand routing operations safer, cleaner, and more
accurate. The polycarbonate shield resists the impact of chips and flying
debris, while the built-in 2-1/2" dust port makes it easy to attach a dust
collector for cleaner, more pleasant routing and better visibility. Plus,
ProGuard's aluminum body doubles as an effective guide pin.
This rugged, lightweight router table combines Bench Dog's 28" ProFence,
ProTop Standard MDF top, and ProTop Open Stand into one complete
package. The fence features an integral bit guard and dust port, as well as a
1/4" accessory T-slot running the entire length of the fence that allows you to
easily attach featherboards and stops. The table top features a redesigned
Titer-Miter Track with width adjustment capability for a no-slop fit. The track
includes a standard miter slot plus dual T-slots for accessories. included
phenolic insert plate is
pre-drilled for a variety of routers (see More Info for list). The durable
Hardwood Birch plywood stand features bolt and cross dowel construction,
steel hardware and an open design
for ultimate sturdiness without being too heavy to move around the shop.
For a complete router table package with ample storage capacity, look no
further than the ProTop Phenolic Complete. It includes Bench Dog's 28"
ProFence, ProTop Phenolic Top, and ProTop Cabinet. Enjoy dust ports in the
fence as well as the cabinet, a redesigned Titer Miter track (with a standard
miter slot and two T-slots, plus width adjustment capability for no-slop fits),
and abundant storage options. With a heavy-duty base that fully supports the
top, this system prevents sagging. Innovative adjustable magnetic scales
can be zeroed on the center or front of the bit. With pullout router bit trays to
keep your bits safe and organized, and room for all your router accessories in
the cabinet, you'll love this system.
Expand your table saw's versatility by adding an industrial grade router table
in place of the extension wing. ProMax is perfect for shops where space is
tight. The table includes a rugged cast iron top, Bench Dog's 28" ProFence, a
miter gauge track that adjusts to your miter gauge for a no-slop fit, and a
pre-drilled router insert plate that fits over 20 of the most popular router
models (see More Info for a complete list). If workspace is an issue, the
ProMax has you covered. Its dual fence slot configuration allows you to rotate
the fence and work from either side of the table to maximize surface area.
Plus, with a third miter slot at its disposal, your table saw will be perfectly
equipped to handle crosscut sleds.
This compact, portable table is packed with full-sized features that make it
one of the finest job site router tables on the market. Its unique forward
offset router location and dual position fence give it as much usable table
surface as most full-size router tables. With 15" of inside cabinet height, it
can house virtually any router. It includes a non-marring laminate top, Bench
Dog's 22" ProFence with integral 2-1/2" dust port, an aluminum miter
accessory track that adjusts for a no-slop fit for standard miter gauges,
a pre-drilled router insert plate that fits many popular routers (see More Info
for complete list), and an enclosed birch plywood cabinet that minimizes dust
and noise.
This premium featherboard holds stock firmly against your power tool's fence
or tabletop for safer, more comfortable cutting. Use it on the table saw to
keep long stock tight against the rip fence, or attach it to your fence to
prevent workpieces from lifting during a cut. From routers to shapers to
bandsaws, Feather-Loc works great to stabilize pieces on a variety of tools. It
features integral fittings for T-slots and includes a miter-slot adapter for
tables and fences with standard 3/8" x 3/4" slots.
Once-in-a-lifetime Bubinga! - As seen in the April, 2008 issue of Woodworker's Journal Magazine!
Design your router table the way YOU want it! The Bench Dog modular router
table system allows you to mix and match any full-size Bench Dog top with
any full-size Bench Dog base. If you prefer the open design of the ProTop
Open Stand, but want the stability and accuracy of the cast iron ProMAX Top,
by all means pair them up. This capability is ideal for woodworkers who have
more than one router table; the ProMAX Cabinet already has storage for
router bits, so the other stand rarely needs it. On the other hand, if you do
need more storage, but want a phenolic top, you can pair the ProMAX Cabinet
with the ProTop Phenolic Top. It’s all about picking the right configuration to
suit your needs — the choice is yours!
The DELTA AP400 includes 1HP, 12/6 amp., 60 hz, 3450 RPM, 120/240V, 1 Phase motor, advanced blower design, (2) 30 micron collection bags, 4" x 5-ft. collection hose, base with four swivel caster assemblies, cord and plug, instruction manual